KD3008-DF54A printheads 1/4 high speed thick film thermal printhead (11.8 dots / mm) KD3008-DF54A using its expertise in lsi technology, rohm has developed new high density driver chips for use in the KD3008-DF54A. capable of being employed for both thermal and thermal transf er printing, with a print speed of 100mm/s, the resulting print heads are the fastest in their class. the high-speed and high-density printing answers the needs of pos, atm, kiosk, and ticket printing devices, which are increasingly being called upon to produce graphical outp ut. z applications label printers atm printers kiosk printers ticket printers z features 1) the use of a special partial glaze and the latest heating elem ent structure, along with new high-density driver chips that can accept big current, has allowed rohm to achieve print s peeds of 100mm/s with using thermal history control, the fastest in its class. 2) standard printheads in the line up are capable of 300dpi. they achieve the high resolution ne eded for graphics and other complex print patterns. z dimensions (unit : mm) 96 0.2 (9) (14) 6.1 0.2 (12.25) 206 0.2 connector.b no.1 no.15 center of heat element max. 25.0 max.23.6 2.6 0.1 230.5 0.3 (heatsink width) 230 (substrate width) 216.832 (effective print width) cl 5-m3(effective depth 3) no.1 connector.a no.15 no.1 no.15 connector.c dot #2560 dot #1 downloaded from: http:///
KD3008-DF54A printheads 2/4 z equivalent circuit vh gnd v dd v dd stb4 stb3 stb2 di4di3 do3 di2 do2 vh dot #2560 dot #1 latch register shift register shift register shift register shift register connector c connector b thermistor 30k ? b:3950 connector a gnd gnd tm tm stb1 di1 do1 clk do4 lat 1 5 6 16 15 20 11 10 stb no. 1 1 to 640 641 to 1280 1281 to 1920 1921 to 2560 23 4 dots / stb. 640640 640 640 dot no. di no. 1 1 to 640 641 to 1280 2 dots / di 640640 1281 to 1920 3 640 1921 to 2560 4 640 dot no. downloaded from: http:///
KD3008-DF54A printheads 3/4 z pin assignments no. 1 gnd gnd stb4 clk v dd do3do4 di4 vhvh vh vh vh vh 23 4 5 6 7 8 9 1011 12 13 14 15 circuit di3 connector c no. 1v h vhvh vh vh di1 vh do1do2 di2 v dd stb1 gndgnd 23 4 5 6 7 8 9 1011 12 13 14 15 circuit lat connector a no. 1 gnd connector b gndgnd gnd gnd nc stb2 tm gndgnd gnd gnd gnd 23 4 5 6 7 8 9 1011 12 13 14 15 circuit stb3 tm z timing chart clock (clk)data in (di) data out (do) latch (lat) "high":hold "low" :through "high":black"low" :white "high":black"low" :white strobe (stb) driver out tw clk t setup di t hold di td do t setup lat tw lat t setup stb tdo tdo t hold lat fig.2 downloaded from: http:///
KD3008-DF54A printheads 4/4 z characteristics effective printing widthdot pitch total dot number average resistance value applied voltage applied power print cycle pulse width maximum number of dots energized simultaneously maximum clock frequency maximum roller diameter running life / pulse life operating temperature parameter rave v h p o slt t on 216.832 0.0847 2560 660 24 0.521.11 0.27 1280 8 25.0 50/5 10 7 5~45 mmmm dots ? v w/dot msms dots mhz mm km/pulses c symbol typical unit z electrical characteristic curves paper : 140lab (ricoh) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 012345 scanning line time ( ms/line) energy ( mj/dot) fig.3 adaptive speed chart 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0.00 0.05 0.10 0.15 0.20 0.25 0.30 energy ( mj/dot) optical density slt : 1.11ms/line fig.4 representative density curve 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 012345 scanning line time ( ms/line) energy ( mj/dot) fig.5 maximum energy curve 0 20 40 60 80 100 120 140 160 180 20 10 10 30 50 70 02 04 06 0 temperature : ( c) resistance : (k ? ) fig.6 thermistor curve downloaded from: http:///
notes no technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of rohm co.,ltd. the contents described herein are subject to change without notice. the specifications for the product described in this document are for reference only. upon actual use, therefore, please request that specifications to be separately delivered. application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. rohm co.,ltd. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by rohm co., ltd. is granted to any such buyer. products listed in this document are no antiradiation design. appendix1-rev2.0 thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact your nearest sales office. rohm customer support system the americas / europe / asia / japan contact us : webmaster@ rohm.co. jp www.rohm.com copyright ? 2008 rohm co.,ltd. the products listed in this document are designed to be used with ordinary electronic equipment or de vices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of which would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. it is our top priority to supply products with the utmost quality and reliability. however, there is always a chance of failure due to unexpected factors. therefore, please take into account the derating characteristics and allow for sufficient safety features, such as extra margin, anti-flammability, and fail-safe measures when designing in order to prevent possible accidents that may result in bodily harm or fire caused by component failure. rohm cannot be held responsible for any damages arising from the use of the products under conditions out of the range of the specifications or due to non-compliance with the notes specified in this catalog. 21 saiin mizosaki- cho, ukyo-ku, kyoto 615-8585, japan tel : +81-75-311-2121 fax : +81-75-315-0172 appendix downloaded from: http:///
|
